2
submitted 1 year ago by DrMuffinz@lemmy.ca to c/buildapc@lemmy.ca

I built my PC about 8 months ago and it's been running great. No overclocking/undervolting (other than XMP). A few days ago it stopped recognizing the boot drive, but only sometimes. The first time I turn it on in the morning it goes straight to the BIOS with no boot drives found. If I power it off and give it a few minutes it boots just fine. It then runs fine, with multiple games and discord going at the same time. Every night I turn off the power strip the computer is connected to and have done this basically since I assembled it.

My boot drive is a NVMe. I have an identical one in the second (of three, third is empty) slots on my mobo and the BIOS recognizes the second one, it just doesn't have the boot info. I've used device manager and windows update to check for new drivers and it says it's up to date. I haven't done anything to update my mobo.

Any thoughts on what could be causing this?

you are viewing a single comment's thread
view the rest of the comments
[-] Intheflsun@lemmy.world 1 points 1 year ago

Could be that the drive is failing. Or it may just need to be re-seated. Either way, take the failed missing one out and put it the other drive in and see if it's detected by bios. If it is, put the failing one in slot 2 and see if it's detected there. If the mobo doesn't detect the good one in slot 1, it may be a bios/mobo issue. If the failing one isn't detected but the known good you moved to slot one is, it's a bad part and under warranty, rma it for a replacement.

this post was submitted on 26 Jul 2023
2 points (75.0% liked)

Build a PC

665 readers
1 users here now

Planning on building a computer but need some advice? This is the place to ask!

Planning on building a computer but need some advice? This is the place to ask! /c/buildapc is a community-driven place dedicated to custom PC assembly. Anyone is welcome to seek the input of our helpful community as they piece together their desktop.

founded 2 years ago
MODERATORS