Self Hosted - Self-hosting your services.

14566 readers

1 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules

No harassment
crossposts from c/Open Source & c/docker & related may be allowed, depending on context
Video Promoting is allowed if is within the topic.
No spamming.
Stay friendly.
Follow the lemmy.ml instance rules.
Tag your post. (Read under)

Important

Lemmy doesn't have tags yet, so mark it with [Question], [Help], [Project], [Other], [Promoting] or other you may think is appropriate. This is strongly encouraged!

Cross-posting

!everything_git@lemmy.ml is allowed!
!docker@lemmy.ml is allowed!
!portainer@lemmy.ml is allowed!
!fediverse@lemmy.ml is allowed if topic has to do with selfhosting.
!selfhosted@lemmy.ml is allowed!

If you see a rule-breaker please DM the mods!

founded 4 years ago

MODERATORS

Zoe8338@lemmy.ml

dogmuffins@lemmy.ml

testman@lemmy.ml

Does it make sense to upgrade my ethernet cables? (beehaw.org)

submitted 2 years ago* (last edited 2 years ago) by boo@beehaw.org to c/selfhost@lemmy.ml

3 comments fedilink hide all child comments

So I self host some stuff like jellyfin, ssh server for borg backup etc. over lan(Asus RT-AX53U router).

And just noticed that i still use cat5 and cat5e cables.

Does it make sense to upgrade to newer cat8 cables?

you are viewing a single comment's thread
view the rest of the comments

[–] nattekrant@feddit.nl 6 points 2 years ago* (last edited 2 years ago)

First and foremost, the user that adviced you to look at the connection speed is 100% right. If you establish a gigabit link with a gigabit device, it makes no sense to upgrade other than future proofing.

There's no point in going beyond Cat 6a. Keep in mind that the length of the cable is a big factor as well. For 1/2.5GbE, Cat 5e is plenty (for at least 100m). If you plan on going to 5/10GbE now or in the near future, Cat 6a will get you there with ease (for at least 100m). In both cases, keep the cable as close to the required length as possible + a 30cm/1ft service loop (slack) on each end. That will cause no more signal degradation then necessary and make for a clean install.