this post was submitted on 08 Aug 2026
17 points (100.0% liked)

Linux

66889 readers
593 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 7 years ago
MODERATORS
 

Edit: managed to boot by reinstalling grub, reinstalling the kernel (latest) with Artix' own basestrap script and then updating grub from a live USB. System saved. ~~Now it won’t accept a new IP from my dhcp server but that’s tomorrow’s problem.~~ Thank you all for your quick respones! 🥰

Artix Linux
Thinkpad T480
Symptoms appeared after a system upgrade

A1MIyZrtTV1qJcl.jpg

Error log:

[    0.801115] VFS: Cannot open root device "UUID=ed827e9a-47e4-490c-8a9a-0f0145925e0b" or unknown-block(0,0): error -6  
[    0.801117] Please append a correct "root=" boot option; here are the available partitions:  
[    0.801119] List of all bdev filesystems:  
[    0.801119]  ext3  
[    0.801120]  ext2  
[    0.801121]  ext4  
[    0.801122]  fuseblk  
[    0.801122]  btrfs  
[    0.801123] 
[    0.801124] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)  

Should I adjust something in fstab from a live USB or can I point to the root partition from GRUB's CLI?

you are viewing a single comment's thread
view the rest of the comments
[–] gnufuu@lemmy.ca 2 points 1 day ago* (last edited 1 day ago) (1 children)

Booting a live USB and reinstalling GRUB as follows has saved my butt in the past. Obviously replace the /dev/sdXY paths with your own. Further adjustments might be needed depending on your system.

# mount root partition:
sudo mount /dev/sdXY2 /mnt
# mount boot partition (if there is any)
sudo mount /dev/sdXY3 /mnt/boot
# mount efi partition (if there is any)
sudo mount /dev/sdXY1 /mnt/boot/efi
# mount other partitions:
for dir in /dev /dev/pts /proc /sys /sys/firmware/efi/efivars /run; do sudo mount --bind $dir /mnt$dir; done  
# chroot into mounted system:
sudo chroot /mnt /bin/bash -i 
# reinstall grub:
grub-install 
# rebuild grub.cfg:
update-grub 
# rebuild initramfs and exit chroot (not sure if necessary):
update-initramfs -u
# sync and exit:
sync
exit
reboot
[–] DickFiasco@sh.itjust.works 1 points 1 day ago

This is also the basic starting point for fixing many boot problems; boot from live USB, mount system partitions, chroot into temporary environment. Most problems are fairly easy to fix if you can just get to a command line.