this post was submitted on 19 Feb 2026
29 points (96.8% liked)
Buy it for Life
8149 readers
8 users here now
A place to share practical, durable and quality made products that are made to last, with an emphasis on upcycled and sustainable products!
Guidelines:
Things that are well-made and durable (even if they won't last a lifetime) are A-Okay!
Unlike that other BIFL place, Home-made and DIY items are encouraged here, as long as some form of instruction is included in the body of the post.
Videos links are not allowed as post titles, but you may use them in a text post.
A limited amount of self-promotion is accepted, IF the item you are selling aligns with this criteria:
- The item must be made with sustainable or recycled materials.
- If electronic in some way, the item must be open-source.
- The item must be user-serviceable (if applicable).
- You cannot be a large corporation.
- The post must be clearly marked with a [Self Promotion] tag in your title.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
For espresso or drip?
The only (finely adjustable) espresso grinders < $100 are probably going to be used or maybe Baratza brand. Baratza does sell many of the replacement parts online, but occasionally the designs get updated and older models can be hard to repair without having to change lots of internals. The models share a lot of their internal designs however and they are quite durable. Used baratza is around $60-75. Burrs can run $40.
Hario makes some good simple hand grinders that you can get new burrs for. The skerton model can screw onto a mason / ball wide mouth jar if you break the glass canister. They can usually make an okay espresso grind but definitely a tier below an electric machine for quality and speed. Hand grinders take about 3 minutes a shot if you are grinding finely. For drip grind levels these are fast enough.
There are plenty of good higher end grinders. I had a Rancilio Rocky that I got second hand, made in 1985, used multiple times daily for years and only needed a small repair to the Doser lever spring. I changed the burrs a couple of times and gave it to a friend and it's still running perfectly as a 40 year old workhorse. Not fancy but quite solid. The only real weak point is some plastics on the case, but they sell replacements. The designs have been fairly maintained over the years and parts are available. I'm pretty sure that if I bought a new Rocky it would outlive me today. A used rocky is about $125 USD @ eBay, street price for new is about $275. They are not the most finely adjustable if you want to fully nerd out on espresso but you can make a damn good shot.
Baratza's lower models work ok when they are new but I wouldn't call them durable. Hario Skerton is crap. If I can find mine, you can have it for free. I'll give OP first dibs though, and will say I don't recommend it except as a backup. Rancilio Rocky is a reasonable choice I guess.
What would you recommend that not Baratza for a, sub-$100 grinder that's repairable and maintainable?
Baratza grinders are not the nicest grinders known, but they do sell every part and you can replace the burrs.
Like I recently sold a KitchenAid double burr grinder that runs double the price of a Baratza Encore. New burrs are not available and all the parts of the KA are breakable glass and unobtainable for repairs. That to me seems crazy, but the flip side is that a $60 Encore is a screaming deal at that price level, for the features of being 100% repairable.
I've refurbished about a dozen Baratza grinders (many old and heavily used) but I have only ever seen one with a motor issue (worn brushes). The most common issues are damage to the plastic exterior parts from being dropped. The main mechanism is surprisingly durable.
Is there a better $60 grinder you're aware of?
https://www.baratza.com/en-us/landing/product/parts
Part cost is VERY reasonable and they ship cheap and fast
As far as I can tell, the top line Baratza models use the same gearbox and motor as the base models
Baratza will sell you the main circuit board for under $15 and the gear box rebuild for like $10. In my opinion that's admirable. Talking like BIFL ethics, the company obviously wants you to be able to repair any issues, versus being disposable.
( Silly question: why do you own a Skerton, and why isn't it broken?)
If you've had to refurbish a dozen Encores, that doesn't sound very durable. Bunn G1 = buy once, use forever. It's a commercial grinder like you'd see in a grocery store. No home user will ever cause significant wear on one of those things. I've seen them on craigslist in the 300 range fairly often. I don't have one because it's too big for my tiny kitchen.
I don't know where to get a Baratza Encore for $60 even used. They are $150 new. Hmm I do see one on Craigslist for $75 right now, so that's pretty close. It's a good value in a cheap grinder, but it's not BIFL in any meaningful sense of the word that doesn't include "keep fixing it forever".
Re Skerton: I don't remember exactly how I got it, but I didn't understand at the time what crap they were. I used it a few times and got an Encore which I still have, which has broken twice so far (once replaced under warranty, once I bought a repair part from them). The Encore doesn't suck but it's light duty and semi-disposable IMHO.
I resell electronics and a lot of related stuff so I have gone through a lot of items over my career. My insight into what breaks and what doesn't comes from seeing hundreds of used items weekly. I've handled many many brands of grinders and refurbished a bunch of them. I have 2 Baratzas I'm selling right now and sold a Hario earlier today. I also sold another Baratza part this week.
I never claimed the Baratzas don't ever break, but the motors last decades and everything else is cheap and simple on them, they are made to be serviced, which makes them extremely good value. This is why they are a good recommendation for the super cheap price. I know iof no sub $100 grinders that don't have some problem eventually. Think of the price tag. A $60 grinder is dirt cheap.
Baratza Encores currently cost about $60-75 on eBay on the lower side of the price range That would be a used working machine covered by a money back guarantee. A couple have sold for just $50-55 in the past 90 days.
I don't dispute some of what you're saying about a commercial grinder like that $1200 Bunn G1, but that grinder only has 7 grind adjustment settings. It's really not comparable to an espresso grinder. The special feature of the Bunn is grinding a pound of coffee in 30 seconds. Like you can't get an espresso shot calibrated with that style of machine. Of course, that's not a home machine and it's not really designed for the purpose of a careful grind size / weight. However, end of the day, that grinder is $475 for a used model. If a Baratza lasts 20 years for $60, is a Bunn 10X as good?
The OP question wasn't about seeking a cheap grinder, it was about seeking a BIFL grinder. I can accept that there's no realistic way to get both without being lucky.
I seem to remember there is a way to get stepless adjustment for the grind size in a Bunn. Also the Encore isn't much of an espresso grinder either.
Incorrect. The encore has 40 grind size levels. It is literally an espresso grinder.
It might not be the best espresso grinder made but it's the best entry level brand at this price. You will only be disappointed by comparing it to machines multiple times the cost. It is not a 5 star machine but its not terrible.
Do you know what the difference is? Between a general purpose grinder and an espresso grinder?
The OP was asking for a BIFL grinder with a maximum budget of $100.
Um lol no, it doesn't work like that. Doing 40 or 400 or for that matter stepless is mechanically trivial in a grinder. If that was all it took, nobody would buy Kafateks.
That doesn't sound BIFL to me, if you buy it today and then upgrade to a better one when you can afford to. While not being absolutist, BIFL to me means that you have a reasonable expectation that it is the last one that you are ever going to buy. So the gear has durable enough to last that long, and good enough that you feel that it will always meet your standards.
Yes, OP didn't ask about espresso at all. Espresso is a huge money sucking rabbit hole that I wisely(?) avoided entering back when I was into this kind of thing. It's a permanent upgrade treadmill. I have several aquaintances with Kafateks, Lyn Webers, machines of the week, lab instrumentation, microscope photos of coffee grounds, etc. I decided not to care. Once in a while I go to the local cafe and have a Slayer shot and I'm satisfied. I don't have to be able to do that at home.
As for the Encore, well, you've had a dozen broken ones in your shop. I'm not an abusive or especially heavy user and I've broken two of them myself. It's an ok grinder but BIFL doesn't come into it, it just doesn't. It's nice that you can get repair parts from them today but do you really expect the company to exist (and not be absorbed into some evil conglomerate) through your entire lifetime? The Forte (Baratza's semi-commercial model at around $800 new) might be a plausible BIFL grinder for the average person. Basically you want a grinder made for commercial or industrial duty, so its service interval (however many thousand pounds of coffee it is supposed to grind before needing major repairs) is larger than a home user is likely to use in their lifetime. If I had unlimited funds I'd probably want a Kafatek, but mostly because I think they are cool.
Baratza was founded in 1999. Do they still sell repair parts for the grinders they were making in those early years? The part that failed on my second Encore was the burr collar, a weird shaped piece of plastic that probably can't be gotten anywhere else. Maybe I could 3D print one but that's beyond the call of duty.
Also don't forget that lots of Encore users like to upgrade the burr to the one sold in the next higher (Virtuoso) model. I never bothered doing that with mine.
Yes and I'm asking for a flying pony. I think it's best to give a realistic answer, which is that what they are asking for does not exist. That happens in every area of life and adults are supposed to be used to it and not get upset. There's a Bunn G2 on Craigslist right now for $275 and that's totally BIFL after a mod or two. There's also a G9 for under $200 but my coffee nerd buddies advised against that model. We don't have to be like AI chatbots who tell hapless humans what they want to hear even if it's nonsense.
It's not completely impossible to keep it under $100 if you see something that is being thrown out from a restaurant or whatever. But that's a matter of luck.
Interesting opinion.
What makes this a better grinder than the $60 Encore? Like how is it so vastly better?
https://www.baratza.com/en-us/product/100-120v-d-shaft-motor-for-flat-burr-grinders-sp0100771?sku=SP0100771
https://www.baratza.com/en-us/product/100-120v-motor-for-conical-burr-grinders-sp0100799?sku=SP0100799
Because they use the same internals. Same exact motor. Just has a different shape on the output shaft.
I wonder if the Forte breaks as easily as the Encore?
Skerton is good for a backup and camping / traveling and the like.
Exactly. I use one during camping and when the power is out.
The skerton is a funny grinder where it makes a very consistent finer grind (like espresso levels), but does a lot worse for coarse grind (drip / french press / pour over) where it loses consistency when the burrs are further open.
Its exactly opposite of most hand grinders where its strong at the one thing that many cheaper manual grinders don't get right.
I have a camping espresso press so it suits my scenario.