homeassistant

18269 readers

3 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Best way to control thermostat schedule - HACS scheduler not working properly (sh.itjust.works)

submitted 5 days ago by Lemmee@sh.itjust.works to c/homeassistant@lemmy.world

6 comments fedilink hide all child comments

Hey gang, I've got a chunk of free time lately, and I've been working on some of the backlog issues I've had with my HA instance. The one that is giving me trouble right now is my thermostat - I use Honeywell total connect (or whatever its called), and it works just fine when using the normal thermostat card or controls. However, I want it to be warmer in the day, and colder at night. So I had been using a scheduler entity from the HACS store. It always used to work, but lately I've been getting out of bed and realizing the temp is still set to the nighttime temp.

It's not every day, and it seems to work 90% of the time, but I had always thought that the scheduler entities did a periodic check to see if the thing they controlled was at the proper state? Seems like if the scheduler 'misses' the switchover time, it's just stuck at the night time temp all day unless I manually change it.

So this got me thinking... Is there a better, or more 'approved' way to do this sort of thing?

you are viewing a single comment's thread
view the rest of the comments

[–] Lemmee@sh.itjust.works 1 points 4 days ago (1 children)

Okay, I was looking through the schedule's logs, and it looked like every day had the schedule triggered when it was supposed to. So I went to my thermostat and changed it to 'non programmable' so there is no day/night cycle on the thermostat itself. I will see if this fixes the missed days.

I am curious though, because I had always been under the assumption that using the scheduler is better than simple time triggered automations because if the system or entity is unavailable at the exact moment the automation triggers, you could miss it. This could lead to irrigation pumps being left on for hours instead of minutes, and furnaces running the wrong temp all day/night, etc. It appears to me that the scheduler integration is simply running an automation at every breakpoint in the defined schedule.

[–] just_another_person@lemmy.world 1 points 4 days ago

Yeah, it's just a simple scheduler. It's not doing anything fancier than that unless you setup other automations for it to do so. It's pretty much the same thing you can get from the thermostat itself, so no real reason to run it from HA unless you're making it pay attention to other sensors or rules.