homeassistant

18269 readers

4 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Best way to control thermostat schedule - HACS scheduler not working properly (sh.itjust.works)

submitted 5 days ago by Lemmee@sh.itjust.works to c/homeassistant@lemmy.world

6 comments fedilink hide all child comments

Hey gang, I've got a chunk of free time lately, and I've been working on some of the backlog issues I've had with my HA instance. The one that is giving me trouble right now is my thermostat - I use Honeywell total connect (or whatever its called), and it works just fine when using the normal thermostat card or controls. However, I want it to be warmer in the day, and colder at night. So I had been using a scheduler entity from the HACS store. It always used to work, but lately I've been getting out of bed and realizing the temp is still set to the nighttime temp.

It's not every day, and it seems to work 90% of the time, but I had always thought that the scheduler entities did a periodic check to see if the thing they controlled was at the proper state? Seems like if the scheduler 'misses' the switchover time, it's just stuck at the night time temp all day unless I manually change it.

So this got me thinking... Is there a better, or more 'approved' way to do this sort of thing?

you are viewing a single comment's thread
view the rest of the comments

[–] just_another_person@lemmy.world 3 points 5 days ago (3 children)

The thermostat and Ha operate independently, so if you happen to accidentally have some schedule or rule defined on the thermostat itself, it will still execute. Check that first.

Next, you need to check your event and trigger logs for your defined schedule or rules and be certain about the if/when they are/aren't firing. It should be pretty clear what's going on there, and if there is a potential time zone issue with this package you've installed.

[–] Smokeless7048@lemmy.world 1 points 5 days ago

I use Versatile Thermostat and scheduler, for a basic control loop, and then use automations to overwrite target temps to versatile thermostat

Ie: normal temp is 20, but if only I am home, house temp is 18.

load more comments (2 replies)