Raspberry Pi

3974 readers

64 users here now

Welcome to the programming.dev Raspberry Pi community!

Raspberry Pi is a series of small single-board computers. It is widely used in many areas because of its low cost, modularity, and open design. It is typically used by computer and electronic hobbyists.

Rules

Members of this community are expected to exhibit mature and respectful behavior.

Those who fail to uphold these standards may find their posts or comments removed, with repeat offenders potentially facing a permanent ban.

Please keep discussions in English so that they can be appropriately moderated.

Links

founded 2 years ago

MODERATORS

snowe@programming.dev

Pigeon@programming.dev

Anyone ever used a 1TB (or larger) SD card in a Pi or Pi clone? (startrek.website)

submitted 1 week ago* (last edited 1 week ago) by IcedRaktajino@startrek.website to c/raspberry_pi@programming.dev

10 comments fedilink hide all child comments

Specifically I'm using the OrangePi Zero 2W and the Banana Pi M4 Zero (both are Pi Zero form factor), but I figure if it works in a Raspberry Pi it should work in these. Wondering if they're worth the cost, if they work at all, and/or if it's just asking for trouble.

The project I'm working on requires a good bit of storage. It's essentially an "internet in a box" device that has a portable selection of media (Wikipedia dump, music, TV shows, movies, and books) as well as web-based software to view them (Kiwix, MPD+Snapcast, Jellyfin, Calibre-Web, etc) as well as some other utilities (PiHole for DNS/DHCP/ad blocking, Searx-NG, VPN clients and routing, etc).

The OrangePi is currently the working prototype, and it has a 512 GB SD card and a 512GB USB-connected NVMe. Due to a quirky wifi chip, it requires a separate USB wifi adapter to do hotspot. Because of this, it kind of sprawls and isn't very portable without disassembly.

The Banana Pi has a better wifi chip and can do hotspot internally. So to keep my portable server keychain sized, I'd like to outfit it with either a 1 TB or 1.5 TB SD card for its media store rather than attaching a USB->NVMe enclosure. This one also has eMMC for the system, so it wouldn't be booting from or writing logs, etc to the SD card. Most of the data/media on the SD card would be WORM (write once, read many) but would be updated/refeshed periodically.

Would a large 1 or 1.5 TB SD card (Samsung or Sandisk, depending on price) be a waste of money or be a cause of issues?

you are viewing a single comment's thread
view the rest of the comments

[–] IcedRaktajino@startrek.website 6 points 1 week ago* (last edited 1 week ago)

Thanks. It's basically a travel router + portable app server + media library. I wanted to play with the much more capable Pi Zero clones and it turns out they can run quite a bit of stuff at the same time and the features snowballed as I just kept adding more stuff (I got the models with 4 GB RAM).

This would be great for parents too

Definitely, at least once I add some GPIO switches to set different modes for the networking (that's kind of a pain point now if you need to setup a different wifi client connection, switch its internet connection from wifi to USB tethering from a connect phone or switch the ethernet port from LAN to WAN, etc).

We had a power outage during a snow storm week or so ago and the prototype ran all day from a power bank and kept a limited Jellyfin library online for everyone (mostly Star Trek and Marvel movies since those are the only things everyone in the house can agree on haha).