this post was submitted on 12 Jun 2025
259 points (100.0% liked)
Cyberstuck
947 readers
323 users here now
A place to post your Cybertruck fails! We're here to make fun of this hunk of shit and throw as much shade as we can to that garbage bag of a human elon.
No doxxing No slurs No racism And no fucking nazis!
founded 3 months ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Coincidentally, I repaired the latch on my car today. There was enough grime on the bearing that the tension of the spring wasn't enough to retain the hook screwed to the hood. Unscrewing the whole latch, cleaning the grease off and spraying some WD40 on it to prevent it from rusting fixed that right up.
It's such a simple mechanism that the whole fix took 10 minutes, and it's the first and only time that ever happened, after 125.000 miles.
It got stuck on a trip, the hood opened a little, right up to the second hook you mentioned, so I used some speed tape to hold the hood down and be extra safe until I made it home to fix the underlying issue. This option doesn't exist on the ridiculous mess that is the Cybertruck.
It's not that the idea isn't right, it's that they tried so hard to make it overly smart, but failed in almost every aspect.
You likely already know, but just in case (and for any readers who don't know).
WD40 is a water displacement compound and so acts as a degreaser and rust softener. It strips the oil and crap off a part, letting it move. It also strips the protective coating off as well. It will rust rapidly without this.
If you use WD40 you need to follow up with replacement oil, or other protection and lubricant. Without it, it will seize up again quite quickly.
I thought about adding a comment, but eventually got lazy. But you're right - I also always make a point of reminding people WD40 is not a good lubricant, so I should have added that, PSA and all.
So, for the record: in this case, I followed it up with an all-weather synthetic chain oil since the stuff I have on hand does have excellent corrosion protection and does in fact lube the bearings in my particular latch mechanism, while lasting.
Thanks for bringing that up.
I've seen too many bicycles destroyed by this over the years. People clean them off in the autumn , then wonder why the gears are rusted to hell in the spring.
I've some relatives who always did this to things, then complained about it. It made me a little... reactive to it.