Orangepi 3 LTS 1st boot surprise (programming.dev)

submitted 7 months ago* (last edited 7 months ago) by Clydesdalecrusher@programming.dev to c/sbcs@lemux.minnix.dev

2 comments fedilink hide all child comments

I bought a orangepi 3 LTS and put it in a case and got a little fan to work via GPIO and got my image in a SD for the first boot. I turn it on and it has android OS v9 on it. I want to run Debian on it for some personal projects as I want to get familiar with Linux environments.

Should I be concerned it has an Os on it when I thought it was new? I have put it on my home network or connected it to anything at all.

How would I go about removing android and booting from SSD to use Debian?

Edit: I looked up the wiki and found it comes with android to test the hardware. All good

top 2 comments

sorted by: hot top controversial new old

[-] XTL@sopuli.xyz 1 points 7 months ago

Don't know where you got your card from and whether it was supposed to have a "demo" os. If it came with the board, it's understandable it would just boot to show the board works.

Also don't know if that opi could have other boot rom on it. That should be in the specs.

But you should be easily able to flash what you want on the card and use that. If you want to go more paranoid route, get a fresh card by a known good manufacturer from a trusted store and start from there.

[-] Clydesdalecrusher@programming.dev 1 points 7 months ago

I got it off of Amazon, it may just be a demo OS. I’ll have to check the specs further. I’ll try flashing it and see what I can change around.

this post was submitted on 08 Apr 2024

12 points (100.0% liked)

Single Board Computers

1225 readers

1 users here now

A community for the discussion of all single board computers. Raspberry Pi is ok, but there are so many other boards now that get looked over that deserve attention.

Post news, questions, your setups, guides, anything that has to do with SBCs. Server wide rules apply

founded 1 year ago

MODERATORS

minnix@lemux.minnix.dev