this post was submitted on 15 Mar 2024
39 points (100.0% liked)

Selfhosted

62256 readers
640 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

Detailed Rules Post

  1. Be civil.

  2. No spam.

  3. Posts are to be related to self-hosting.

  4. Don't duplicate the full text of your blog or readme if you're providing a link.

  5. Submission headline should match the article title.

  6. No trolling.

  7. Promotion posts require active participation, with an account that is at least 30 days old. F/LOSS without a paywall has exceptions, with requirements. See the rules link for details. Tags [CBH] or [AIP] are required, see the links in Rule 8 for details.

  8. AI-related discussions and AI-involved promotional posts have additional requirements for tagging, as noted in Rule 7 and the AI & Promotional Post Expanded Rules post, and find example disclosures here.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 3 years ago
MODERATORS
ruud@lemmy.world
Loki@lemmy.world
CannaVet@lemmy.world
devve@lemmy.world
ayyy@sh.itjust.works
curbstickle@anarchist.nexus
curbstickle_lw@lemmy.world
39
Optimize power consumption (derpzilla.net)
submitted 2 years ago* (last edited 2 years ago) by Kwa@derpzilla.net to c/selfhosted@lemmy.world
53 comments fedilink hide all child comments
 

So I have finally built my NAS. I used an N100 CPU because I saw it has low power consumption.

Right now I have 2 NVMe SSDs and 2 HDDs. I have installed proxmox on the 2 SSDs as RAID1. I have not partitioned the HDDs yet, they are just plugged in and powered on.

Just booting into proxmox, without any VMs or containers running, I am pulling 45W from the wall. This looks super high to me, and I’m afraid that starting to use the HDDs and running some VMs may double this…

I don’t have much references, but I have an Odroid with an external self-powered HDD, it is using 5W. I have a raspberry pi 4 with an external HDD, the raspberry is pulling 3W and the HDD 3W.

With these data, I was thinking I wouldn’t go over 20W. 45W is enormous and not something I can run 24/7, kind of a fail for a NAS…

Have I done something wrong or is it just how much it’s supposed to pull?

Edit: I have come across powertop. Using the auto tune, I was able to drop to 33-35W. I have unplugged the HDDs and dropped to 22W. I guess I cannot go lower, this may be because of the PSU or the 2 NVMe

you are viewing a single comment's thread
view the rest of the comments
[–] Kwa@derpzilla.net 2 points 2 years ago (2 children)

Thanks, this is really efficient. I now have good hopes that changing my PSU should bring me closer to this

[–] whereisk@lemmy.world 2 points 2 years ago (1 children)

It's literally one of those little known brand nuc, tiny box - beelink I think. Total cost $200 or so - it's been running non stop for the last 3 months without an issue. I don't think it even has a fan in there.

[–] paf@jlai.lu 1 points 2 years ago (1 children)

Curious, might have same machine but do consume a bit more, do you have one SSD + one nvme?

[–] whereisk@lemmy.world 2 points 2 years ago* (last edited 2 years ago)

Sorry, I must have been too tired, got nearly all details wrong: 32GB RAM 1TB M.2, USB3.2, BT4.2,WiFi 5,4k HDMI, Gigabit Port, and not a Beelink but a DreamQuest. There's just the M2 interface disk connected, no SSD.

[–] possiblylinux127@lemmy.zip 2 points 2 years ago* (last edited 2 years ago)

You still won't see that low of power consumption when you have something custom built.

With that being said you have a lot of room for improvement