37
Recommendation for NAS (derpzilla.net)
submitted 9 months ago* (last edited 9 months ago) by Kwa@derpzilla.net to c/selfhosted@lemmy.world

I’m looking for some recommendations to improve my homelab. But first a bit of history to explain where I’m at and where I’m going. I currently have a super old Odroid C2 and a Raspberry Pi 4B. Everything is working great, but I’m missing two things in this setup: -The ability to transcode -A NAS Now a little bit about me, I’ve been using Linux for more than a decade, so I know how to do stuff, but when it comes to hardware, I have close to zero knowledge… So I was a bit surprised when I plugged 2 external HDDs on my rpi and it shutdown them after a few minutes. I found out that it was a power supply issue, so I did the first thing that came to my mind at this time: I bought another HDD with external power supply, to then find out that having a self powered and an external powered HDD would still fail (although it took longer).

So now I know my mistakes, I should have gone with a NAS instead. I checked the Synology NAS and found out NAS are actually quite expensive. I’m looking for at least 4 bays. I’ve been looking at some DIY NAS, but I’m a bit lost. I found some builds using a Jonsbo N2 that seems cool but at the same time I’m reading the fans are always running at full speed and I’m afraid that the power consumption will skyrocket.

So to sum up, I would like to have a NAS, ideally that can transcode and is low power. In the beginning, I wanted to have a NAS and a mini-PC that can transcode to replace my Odroid C2. But it seems the NAS are far more expensive than the mini PC. What are the recommendations here?

-Synology (Can it transcode?)

-A DIY (Jonsbo with an ITX board that can transcode)

-A DIY (Jonsbo with an ITX board just powerful enough for a NAS) + a mini PC

-Something else?

My budget was 500€, but it seems I won’t be able to do much below 700€

you are viewing a single comment's thread
view the rest of the comments
[-] Kwa@derpzilla.net 1 points 9 months ago

I would have, but this is all about the power consumption. Getting an old PC, I’m afraid to be at least around 100W…

[-] Elkenders@feddit.uk 4 points 9 months ago

I use an Intel NUC with a recent(ish) Intel CPU that's good for transcoding and not bad on power. Then a 4 bay DAS. You can either get something with hardware RAID or without and do it in software. I run Debian but another OS might be better for you.

[-] pirat@lemmy.world 1 points 5 months ago

Got any recommendations for a good DAS with a fair price, either new or used?

I'm looking for something to place three 22 TB drives in, eventually to be expanded in the future, so I'm looking for a DAS with at least three 3.5" bays.

[-] Elkenders@feddit.uk 2 points 5 months ago

I bought a used QNAP TR-004. Seems to do the job but I didn't realise it doesn't support migration or expansion which is a bummer. Expansion in particular, I bought 3 8tb drives so got an empty bay that will be awkward to fill when needed.

[-] lemmyvore@feddit.nl 3 points 9 months ago* (last edited 9 months ago)

The 4 HDDs alone will do at least 60W, no matter what you connect them to.

CPUs have excellent idling capabilities, and you can control and customize fans.

You may save like 10-20W with a low power PC but you also give up a lot of features — HDDs in a cramped enclosure with one 50-80mm fan going crazy vs having 2x 120mm fans spinning slowly for example.

You also have to figure out offsetting the initial costs — how soon will the money you spend on hardware will be recovered from the power bill savings? If it takes 10 years to break even it may not be worth it to you.

[-] Kwa@derpzilla.net 1 points 9 months ago

Indeed, this is something I need to take into account

[-] possiblylinux127@lemmy.zip 3 points 9 months ago

Not really unless you are buying a monster. For instance, the i7-6700k has a TDP of 91W. If you go with a Intel i5-6500 it was a TDP of 60W.

If you want really efficiency you could go with a Intel N100 as it has a TDP of 8W and is much newer.

[-] vividspecter@lemm.ee 2 points 9 months ago* (last edited 9 months ago)

~~Look at mini-PCs like the Lenovo Tiny series. These can be had for very little on the used market, and don't use much power (<10W typically, although I don't have any mechanical HDDs in mine).~~

EDIT: Obviously missed that you meant just a single device for everything. SFF PCs usually have a few SATA slots, and their power usage and price on the used market isn't too bad.

[-] Kwa@derpzilla.net 1 points 9 months ago

Actually I wanted to have a NAS and another more powerful server. But this is because I thought NAS were some cheap basic servers… When I saw the price I thought I might as well have a single more powerful server doing NAS + transcoding. I haven’t made my mind up, I’ll check the Lenovo Tiny, thanks

this post was submitted on 05 Feb 2024
37 points (95.1% liked)

Selfhosted

39677 readers
399 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS