I disassembled an AMD CPU Wraith Cooler, meaning, I took the fan off of the heatsink, because I want to attach the fan on top of a Raspberry Pi that I'm using as a router. The Pi runs quite hot because it transmits several hundred megabytes per second, non stop, and I want to give it some cooling. (It already has its own heatsinks on its various chips inside the chassi and I don't want to use the little shitty Okdo fan, because it's loud.)
Is there any smart solution to how I could power this 4-pin fan? It needs 12V DC.
This is the Pi with its chassi.
And I'm considering something barbaric like this.
~~Are there perhaps conveniently positioned GPIO pins on the Pi that the 4-pin connector could just slide on to and just work?~~ Never mind this. The Pi 4 that I'm using can only output 5V:
Or would I need to cut off the 4-pin connector to expose the individual wires and attach them to a 12V DC adapter?
Or any other genuis solutions? :)
I think PWM fans need 12V all the time. Maybe you have a cheap 3-pin fan, then you can just give it 5V. It'll run slower, but you probably don't need full power.
You could get a cheap boost convert to up 5V to 12V if you want the Pi to power it.
I had no idea the Pi's output could be boosted. Sweet!