completely open source: https://git.sr.ht/~pinsl/split-keyboard
designed using KiCad and OpenSCAD
inspired by the cheapino
Ergonomic, split and other weird keyboards
Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)
i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²
¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid
No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.
This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.
The connector that the cheapino uses (8P8C) has eight pins while the 4P4C connector that I use has four pins. The cheapino uses eight wires to connect its halfs. So no, you cannot just use the 4P4C connector instead of the 8P8C connector.
Note that the terms RJ11 and RJ45 only specify the type of connector but don't how much pins it has. Use the terms 4P4C and 8P8C instead.
Thanks for the explanation! Yeah, I misremembered what I read about the cheapino not using all of its 8P8C wires (it uses 7 out of 8), but that makes sense.