retrocomputing

5561 readers

26 users here now

Discussions on vintage and retrocomputing

founded 2 years ago

MODERATORS

SDF@lemmy.sdf.org

cognitivegears@lemmy.sdf.org

Penkster@lemmy.sdf.org

Help imaging a IDE drive (sh.itjust.works)

submitted 1 week ago by bridgeenjoyer@sh.itjust.works to c/retrocomputing@lemmy.sdf.org

20 comments fedilink hide all child comments

I am imaging this drive just in case it dies (from a 2000 gateway laptop I'm setting up for old games). it's a 2.5" IDE Toshiba drive. It works just fine, has Win 2k on it. I have tried 2 different IDE to usb adapters, and both have powered up the drive, but neither have shown anything in fdisk (on linux). No weird noises or bad clicking from the drive.

I do notice that the drive does not have any jumpers on it - so I didn't think I'd need to put a jumper on master (if it has that, i need to look closer) but I figured it would already have the jumper on master if it was the only drive in the laptop right?

you are viewing a single comment's thread
view the rest of the comments

[–] bridgeenjoyer@sh.itjust.works 1 points 1 week ago

It does have pcm slot and it does work. Ethernet may be my best option.

The other issue is the cd drive spins up but does not seem to be able to be reading either.