retrocomputing

5559 readers

27 users here now

Discussions on vintage and retrocomputing

founded 2 years ago

MODERATORS

SDF@lemmy.sdf.org

cognitivegears@lemmy.sdf.org

Penkster@lemmy.sdf.org

Help imaging a IDE drive (sh.itjust.works)

submitted 6 days ago by bridgeenjoyer@sh.itjust.works to c/retrocomputing@lemmy.sdf.org

20 comments fedilink hide all child comments

I am imaging this drive just in case it dies (from a 2000 gateway laptop I'm setting up for old games). it's a 2.5" IDE Toshiba drive. It works just fine, has Win 2k on it. I have tried 2 different IDE to usb adapters, and both have powered up the drive, but neither have shown anything in fdisk (on linux). No weird noises or bad clicking from the drive.

I do notice that the drive does not have any jumpers on it - so I didn't think I'd need to put a jumper on master (if it has that, i need to look closer) but I figured it would already have the jumper on master if it was the only drive in the laptop right?

you are viewing a single comment's thread
view the rest of the comments

[–] bridgeenjoyer@sh.itjust.works 1 points 6 days ago

Maybe clonezilla would recognize it. Windows isn't recognizing usb devices at the moment.

I put the adapter in the main post.