Hello. I'm a new rider who recently purchased a ten year old bike. I have ZERO mechanical know how, but decided that I wanted to learn.
So far I managed to take both the front and rear wheels off to get the tires changed and I managed to change the oil. Since I am unskilled, it took a LOT of fumbling through these to get things going...including breaking some nuts (rear axle nut was stuck and I originally only had a 12 point socket) and bolts (overtorqued an oil filter cover bolt despite using a torque wrench) and buying replacement ones.
Since the bike is 10 years old, I know that all of the fluids need to be changed. I feel comfortable attempting the actual change for the brake fluid from my research EXCEPT I don't want to irreparably damage this area. The front brake works fine, but the sight glass is totally clouded and opaque, so I cannot visually check the condition or level of the fluid.
These are JIS screws and I have purchased replacement screws. Any advice here? Please consider my novice skill level lol.
I bought some screw extractor bits but do not have an impact driver. I have some JIS screwdrivers, a hammer, a regular drill, penetrating oil, and replacement JIS screws.
Thanks!
try tapping your screwdriver into the screws with a hammer, or drilling out a shallow hole in the middle of the stripped screw before tapping in the screwdriver, then push down on the screw driver while slowly unscrewing it.
I've done the hammer tapping thing before and it worked so I would try that first. If it doesn't work, yeah, it might be time for a mechanic, they deal with stripped screws a lot and they can always bore out the entire thing and then secure it with a new bolt and nut from the other side.